CY Lead-Free Wave Soldering Machine CY-350B
Detailed Photos
Features
Windows7 operating system, Chinese and English interface switch, easy to operate.
Fault diagnosis function, can display each fault, display and store in automatic alarm list
Control procedures can automatically generate and backup the data report, easy to ISO 9000
management
Automatic board access device, smooth and stable.
Specially hardened aluminium guide rail with high hardness and strength, guarantees no deformation at
high temperature
4mm SUS316L imported stainless steel furnaces, new design, beautiful appearance
Wave automatically when board through,adjustable peak width to minimize tin oxidation
600mm extended two-section preheating, infrared independent PID temperature control, uniform
heating, safe and stable.
Spry System
With Lumina (Japan) nozzle, the spray range is20-65mm, the nozzle height is 50-80mm, and the maximum flow rate is 60ml/min.
Uses AirTAC (Taiwan) filter, pointer gauge shows air pressure, all spray system pipes are acid and alkali resistant corrosion
protection pipes.
Spraying system adopts scanning spraying method, limit switch and entry eyesight are combined to control, and PCB is
automatically detected by inductive spraying according to the speed and width of PCB, so that the wetting range of flux can
achieve the best effect. Inlet spray head and stepping motor are efficient, stable and reliable.
Stainless steel bent forming tray is used underneath the spray head for loading wastewater and flux, which can be extracted and
cleaned at will.
The air extraction system is a superimposed automatic recovery system with three layers of stainless steel wire mesh filtration
to minimize residual flux blockage in the air extraction pipeline by utilizing the fluid characteristics to filter excess flux.
Pneumatic air knife, which blows excess flux during spraying into the recovery tank to prevent flux from entering the preheating
zone and ensure production safety.
All stainless steel + aluminium alloy support, easy cleaning and maintenance, strong corrosion resistance, durable.
Heating system
"Far Infrared + Hot Air" Composite Heating Principle
Porous plate heater is used as the infrared heating source and the far infrared light penetration is used to
directly heat the PCB , thus avoiding the problem of insufficient heating capacity in traditional full hot air
mode.
Composite heating, mainly by infrared heating, supplemented by hot air convection, can improve
heating capacity and uniform heating.
High temperature hot air motor is imported from Sanyue (Taiwan). The heating wire is nickel winding
and its service life is greatly improved.
Modular pull-out design facilitates operator maintenance
Soldering system
4mm SUS316L imported stainless steel bladder, new type of bladder design, beautiful appearance, easy cleaning, cast iron heating
plate, no deformation of the bladder
Adjustable peak width to minimize tin oxidation, removable without removing the nozzle
The position of impeller shaft increases the oxidation shield and reduces the tin oxide produced by the rotation of impeller shaft.
The impeller shaft and peak motor parts can be separately removed without removing the tin track (other brand peak welding can not do this design).
Tin slag oxidation: using 200*200 mm PCB plate as test plate and calculating at 300 pcs per hour, the amount of tin slag produced in 10 hours is 2KG
Product Parameters
|
Model
|
CY-350B
|
|
Control method
|
Dell computer(Windows7)+Siemens PLC
Industrial control computer+PLC
|
|
Conveyor motor
|
3∮ AC380V 90W,Tai Chuang
|
|
Pcb size
|
50-450mm(w)
|
|
Preheating Zone
|
Power:16KW Length:(1800mm 4sections PID control
|
|
Solder temperature
|
9KW
(Room temperature -300ºC)
|
|
Solder capacity
|
400kg
|
|
Wave motor
|
3P AC 220V 0.36KW*2pcs,Brand:Taichuang
|
|
Finger cleaning pump
|
1P AC220V 6W
|
|
Cooling system
|
Forced-air cooling
|
|
PCB transport direction
|
L→R /(R→L)
|
|
Nozzle move
|
stepper motor or SMC rodless cylinder
|
|
Flux capacity
|
6 LITRES
|
|
Air pressure of flux
|
3-5BAR
|
|
Conveyor angle
|
4-7ºC
|
|
Power supply
|
3P AC380V 50Hz
|
|
Normal/starting power
|
28KW/8KW
|
|
Weight
|
1400kg
|
|
Cooling system
|
Mandatory cooling
|
|
Dimension
|
3800(L)x1360(W)x1700mm(H)
|
|
Appearance
|
4400(L)x1400(W)x1700mm(H)
|
Exhitbition
Certifications
Packaging & Shipping
Clients
Company Profile
Chengyuan Industrial Automation Equipment Co.,Ltd
Chengyuan(CY) is the leading SMT factory solution provider in China,offering professional SMT factory building advice and service.We have 10 year experience about SMT factories,offering full solutions for global clients with our great advantaged sources.Our core technology team members are well experienced in SMT filed, learning experience from top international chip mounters meanwhile increasing independent research and development Currently CY SMT equipment is representative of high quality , has maintained absolute leading technology in the industry.
FAQ:
Q: What's your main service?
A: We provide total SMT machines and soluton service, professional technology support and after sales.
Q: Are you a trade company or a manufacture?
A: We are an experienced manufacturer of SMT and PCBA equipment, OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Q: What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.
Q: Can you provide a whole line solution?
A: Yes, We can supply SMT line, Coating line, DIP line and LED production line.
Audited Supplier 
){kind=link}